Toronto, Ontario--(Newsfile Corp. - September 5, 2017) - Augusta Industries Inc. (TSXV: AAO) (the "Corporation") is pleased to announce that Enbridge Inc. ("Enbridge") has published on its website a complimentary article on the Corporation that highlights its technology and capabilities and benefits to Enbridge. The article can be found by following the link provided below and the Corporation has taken the liberty to republish the article below.
"We are honored and pleased that Enbridge has the confidence in the Corporation and its technology to publish the article," stated Allen Lone, the President of the Corporation. "The article reaffirms what the Corporation believes — its technology is invaluable to its clients and is reliable and solid."
It's highly accurate, it's non-intrusive, it's continuous and it goes with the flow.
Electrically speaking, that is.
For the past decade, Electric Field Mapping (EFM) technology—developed by Toronto-based FOX-TEK Canada Inc.—has been helping to keep Enbridge's pipeline network healthy and fit for purpose by staying "current," in a manner of speaking.
"If you put your finger in a stream, the water goes around your fingers. And that's essentially how our EFM technology works," says Allen Lone, President and CEO at FOX-TEK Canada Inc., a subsidiary of Augusta Industries Inc.
"Based on a continuous EFM monitoring system, we're measuring the minute changes in electrical current density through a segment of the pipe where our sensor array is mounted," adds Lone. "If there are any localized changes in the pipe wall—such as metal loss due to corrosion—our EFM system will detect a change in the current density."
FOX-TEK's EFM technology, as well as the company's fiber optic-based optical strain gauges and sensor cable-based leak detection systems, are used all over the world—on anything from tanks and vessels to overpasses and bridges to refineries and electrical towers.
For energy pipelines in particular, EFM is a complementary technology that can be used to supplement a pipeline operator's inspection and maintenance tactics.
Where a high-tech in-line inspection (ILI) tool has detected a localized area of minor internal corrosion that warrants monitoring, FOX-TEK will install an array of up to 200 wired metal pins, reflecting the size and the shape of the affected area, to monitor changes in the pipe wall's electrical field.
Significantly, EFM systems are:
Built for remote applications, with each pin sensor array fully autonomous through solar-powered battery packs;
Continuous, as opposed to monitoring systems that must be manually checked;
Non-intrusive, allowing operators to monitor the effectiveness of their pipe cleaning regimens; and
Accessible, with wireless data transmission and cloud-based data storage that's available 24/7 via web-based portals.
"Crude oil transmission pipelines are typically at low risk of internal corrosion due to the cleanliness of the transported products, as well as their high flow rates," says Trevor Place, a senior engineering specialist with Enbridge's liquids pipelines division. "Nevertheless, over the very long term, there may be periods when accumulated sediment and water have caused corrosion. These locations are easily detected through our in-line inspection programs, and some of these may become suitable for supplemental monitoring using EFM technology.
"Because they're real-time and continuous," adds Place, "FOX-TEK monitoring systems are capable of a high level of precision—and they provide validation for our ongoing mitigation activities, like interior cleaning or chemical additives that minimize bacteria and prevent corrosion."
FOX-TEK's EFM technology is currently providing continuous monitoring at several locations along Enbridge's 17,511-mile (28,181-km) North American crude oil and liquids network.
"Because the EFM system is monitoring the actual pipe wall, there really is no better representation of what's happening inside the pipe," says Place. "FOX-TEK has been a solid performer for Enbridge for years."
About the Corporation:
Through its wholly owned subsidiaries, Marcon International Inc. ("Marcon") and Fox-Tek, the Corporation provides a variety of services and products to a number of clients.
Marcon is an industrial supply contractor servicing the energy sector and a number of US Government entities. Marcon's principal business is the sale and distribution of industrial parts and equipment.
FOX-TEK provides world leading solutions to various sectors including the oil and gas industry. With non- intrusive technologies including: fiber optic sensors and electric field mapping systems; we are able to accurately measure changes that could negatively impact our client's operations.
Allen Lone, President, CEO, Augusta Industries Inc.
Tel: (905) 275 8111 Ext 226, email: firstname.lastname@example.org
The TSX Venture Exchange has in no way passed upon the merits of the proposed transaction and has neither approved nor disapproved the contents of this press release.
This press release contains forward-looking statements based on assumptions, uncertainties and management's best estimates of future events. Actual results may differ materially from those currently anticipated. Investors are cautioned that such forward-looking statements involve risks and uncertainties. Important factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements are detailed from time to time in the Corporation's periodic reports filed with the Ontario Securities Commission and other regulatory authorities. The Corporation has no intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.